Rate sensitivity and deformation mechanism of semi-crystalline polymers during instrumented indentation

Instrumented indentation tests using both constant loading rate (CLR) and continuous stiffness measurement (CSM) operation modes were performed to investigate the deformation mechanism and their sensitivity to the deformation rate in semi-crystalline polymers through the quantitative analysis of load-depth loading and unloading curves. The strain rate was constant during the CSM tests, while the strain rate decreased with the increasing of loading time in CLR tests. The mechanical response mechanism of the semi-crystalline polymers to these tests was very complicated because of the combined effects of strain-hardening in the crystal phase and strain-softening in the amorphous phase. Results show that the loading index m reflects the strain-hardening or strain-softening response during indentation. When m > 2, the mechanical response was due to the strain-hardening, and when m < 2, the response was due to strain-softening. A method based on the measured contact hardness was proposed to obtain the unloading stiffness, and the other mechanical parameters could then be determined according to the unloading stiffness.     

Local discontinuous Galerkin method for a nonlocal viscous conservation laws

The purpose of this article is to investigate high‐order numerical approximations of scalar conservation laws with nonlocal viscous term. The viscous term is given in the form of convolution in space variable. With the help of the characteristic of viscous term, we design a semidiscrete local discontinuous Galerkin (LDG) method to solve the nonlocal model. We prove stability and convergence of semidiscrete LDG method in L² norm. The theoretical analysis reveals that the present numerical scheme is stable with optimal convergence order for the linear case, and it is stable with sub‐optimal convergence order for nonlinear case. To demonstrate the validity and accuracy of our scheme, we test the Burgers equation with two typical nonlocal fractional viscous terms. The numerical results show the convergence order accuracy in space for both linear and nonlinear cases. Some numerical simulations are provided to show the robustness and effectiveness of the present numerical scheme.     

等离子体电极普克尔盒研究进展

等离子体电极普克尔盒(PEPC)用作多程放大控制、自激振荡抑制以及反激光隔离,是大型高功率固体激光器的核心器件。本文从高功率固体激光器的发展对光开关提出的要求出发,系统地综述了等离子体电极普克尔盒的性能特点以及研究进展。重点介绍了中国工程物理研究院激光聚变研究中心近年来在PEPC研究方面所取得的进展,包括单脉冲驱动的组合口径PEPC、低损耗PEPC以及重复频率运转的PEPC。     

Generalized Jacobi spectral Galerkin method for fractional pantograph differential equation

This work is concerned with the extension of the Jacobi spectral Galerkin method to a class of nonlinear fractional pantograph differential equations. First, the fractional differential equation is converted to a nonlinear Volterra integral equation with weakly singular kernel. Second, we analyze the existence and uniqueness of solutions for the obtained integral equation. Then, the Galerkin method is used for solving the equivalent integral equation. The error estimates for the proposed method are also investigated. Finally, illustrative examples are presented to confirm our theoretical analysis.     

On the rate of convergence of solutions in free boundary problems via penalization

The rate of convergence of approximate solutions via penalization for free boundary problems are concerned. A key observation is to obtain global bounds of penalized terms which give necessary estimates on integrations by the nonlinear adjoint method by L.C. Evans.     

An asymptotic Reissner–Mindlin plate model

A mathematical study via variational convergence of a periodic distribution of classical linearly elastic thin plates softly abutted together shows that it is not necessary to use a different continuum model nor to make constitutive symmetry hypothesis as starting points to deduce the Reissner–Mindlin plate model.     

Domain decomposition methods in a geometrical multiscale domain using finite volume schemes

The heat equation is solved by using a finite volume discretization in a domain that consists of a two-dimensional central node and several one-dimensional outgoing branches. Several interface connection options to match the submodels set on the node and on the branches, with or without continuity, are looked at. For each of them, a monolithic scheme is defined, and existence and uniqueness of the solution is proved. New schemes are deduced, which are obtained through domain decomposition methods in the form of interface systems, with one or two unknowns per interface. A comparative systematic study is carried out from an algebraic and numerical point of view according to the interface conditions: Dirichlet, Neumann, or Robin. An efficient diagonal preconditioning is proposed.     

水硬性石灰合成及拉破坏特性试验研究

水硬性石灰在欧洲石质文物修复和加固中获得了很大成功。我国的石质文物主要是砂岩,水硬性石灰的修复效果不好。为满足我国石质文物修复和加固的需求,本文以石灰石和黏土为原料,在950℃煅烧不同时间,制备出水硬性石,对试样的成分、微观形貌、收缩率、抗拉强度和拉破坏过程等进行了研究。结果表明:(1)试样中含有水硬性成分2CaO·SiO2(C2S);煅烧8h时,成分与欧洲水硬性石灰NHL5接近;1.5CaO·SiO2·xH2O(C-S-H)和CaCO3的含量随龄期的增加逐渐增加。(2)龄期1~3d,收缩率较小;龄期4~6d,收缩率以线性规律增加;7d以后,收缩率趋于稳定。(3)局部变形区随拉应力的增加而变大,邻近局部变形区逐渐合并,形成面积更大的应变局部化带;载荷超过峰值后,产生微裂隙;随载荷进一步增加,微裂隙扩展,贯穿整个试件,发展成宏观裂隙,使试件破坏。(4)抗拉强度随龄期的增加而增加,水硬性石灰中C-S-H、CaCO3等相互交织,构成空间致密体,使试件力学强度提高。合成的水硬性石灰物理力学性能与欧洲水硬性石灰NHL5相近,并且成分均匀、可控,在石质文物修复和加固工程中具有良好应用前景。     

溶剂去除速度对于溶剂退火薄膜相形貌的影响

以聚苯乙烯-聚4-乙烯基吡啶(PS-b-P4VP)嵌段共聚物作为研究对象,采用DMF作为退火溶剂,以原子力显微镜(AFM)和透射电子显微镜(TEM)为表征手段,研究了溶剂退火后期溶胀薄膜中溶剂的去除速度对于薄膜相形貌的影响,发现通过改变溶剂去除速度可以有效的调控薄膜中的形貌.当薄膜厚度为35 nm时,DMF的快速挥发会导致薄膜中形成以PS为分散相的反转柱状相结构,当降低溶剂的挥发速度时,薄膜中形成了以PS为分散相的环状形貌,当进一步减缓挥发速度时,薄膜中将形成台阶状的片层结构;然而当薄膜厚度为55 nm时,溶剂退火后期薄膜中形成的是以P4VP为分散相的正常柱状相结构,在相同溶剂去除速度条件下薄膜相形貌变化较小.